How Much Does TV Mounting Cost?
TV mounting costs typically range from $100 to $350 per installation, depending on wall type, number of TVs, and cable management. Professional installation ensures safety, proper weight distribution, and a clean, finished look.
Cost Calculator
Cost breakdown
| Item | Low | High | Unit |
|---|---|---|---|
| Standard mount (drywall) | $80 | $200 | per TV |
| Brick/concrete mount | $150 | $350 | per TV |
| Cable concealment | $50 | $200 | per install |
What affects the cost
These are the main variables that shift the final price up or down.
Wall material
High impactBrick and concrete require special anchors and drilling; drywall is cheapest. Tile and plaster fall in between.
Number of TVs
High impactEach additional TV adds labor and materials. Bulk mounting may offer slight per-unit discounts.
Cable concealment
High impactIn-wall conduit runs $150–$250; surface raceway $50–$150. Visible cables cost nothing extra.
TV size and weight
Medium impactLarger, heavier TVs (65"+ or 100+ lbs) may require reinforced mounts and additional studs, increasing cost.
Stud location and accessibility
Medium impactIf studs are not where you want the TV, additional blocking or heavy-duty anchors are needed.
Height and complexity
Medium impactHigh walls, vaulted ceilings, or awkward angles increase labor time and scaffolding needs.
Electrician involvement
Low impactAdding new outlets near the TV or running power may require licensed electrician work (additional $150–$400).
How tv mounting cost calculator pricing works
A technician assesses your wall material, locates studs or uses appropriate anchors, and secures the mount bracket. For drywall, they drill pilot holes and use heavy-duty anchors; for brick or concrete, they use masonry bits and anchors. Cables are then routed—either left visible, run through surface raceway, or concealed in-wall. Finally, the TV is attached and leveled. The entire process typically takes 1–3 hours per TV.
TV Mounting Cost Breakdown
The cost of mounting a TV depends on several key variables. Standard drywall mounting typically costs $80–$200 per TV, making it the most affordable option for most homeowners. This includes the mount bracket, installation labor, and basic wall anchors. Brick and concrete mounting is significantly more expensive at $150–$350 per TV because it requires specialized masonry bits, concrete anchors, and extra labor time to drill through hard materials.
Wall Material Impact
Your wall type is the single biggest cost driver. Drywall is quick and inexpensive—technicians locate studs, drill pilot holes, and secure the bracket. Plaster walls ($100–$250 per TV) require careful drilling to avoid cracking. Tile walls ($120–$280 per TV) need diamond-core bits and special anchors to avoid shattering. Brick and concrete are the priciest because they demand heavy-duty masonry equipment and take 2–3 times longer to mount.
Cable Management Options
Cable concealment adds significant cost but dramatically improves aesthetics. Visible cables cost nothing extra. Surface raceway (plastic or metal channels along the wall) runs $50–$150 for a single TV and is the fastest, non-invasive option. In-wall conduit ($150–$250) involves running cables through the wall cavity—it looks cleanest but requires cutting into drywall, fishing cables, and patching. If you need new electrical outlets near the TV, add $150–$400 for electrician work.
Labor and Additional Factors
Labor typically accounts for 40–60% of the total cost. Standard installations take 1–2 hours; complex jobs with conduit, multiple TVs, or difficult wall materials can take 3–4 hours. If the TV is very large (75"+ or over 100 lbs), expect an upcharge of $50–$100 for reinforced mounts. Mounting above a fireplace or in a vaulted ceiling may cost 20–30% more due to scaffolding and safety requirements.
National Pricing & Regional Variation
The national average for a single TV mount is $200. Urban areas with higher labor costs typically charge $250–$350, while rural regions may be $100–$200. Some companies offer package deals: mounting 2–3 TVs might cost only 25–30% more than a single installation due to efficiency gains.
Cost Breakdown by Service
- Standard mount (drywall): $80–$200 per TV
- Brick/concrete mount: $150–$350 per TV
- Cable concealment (surface raceway): $50–$200 per install
- Cable concealment (in-wall conduit): $150–$250 per install
- Heavy-duty reinforced mount: +$50–$100
- Electrician for new outlet: $150–$400
When to DIY vs. Hire a Professional
DIY mounting is tempting but risky. If you have basic tools, locate studs easily, and mount to drywall, you might save $80–$150. However, mistakes—like missing studs, using wrong anchors, or improper leveling—can damage your TV or wall, costing far more to repair. Professional installers have stud finders, levels, cable management tools, and insurance. They also know how to handle heavy TVs safely and can troubleshoot unexpected issues (like finding plumbing or electrical behind the wall). For anything beyond basic drywall mounting, hire a pro.
When to hire a pro
Hire a professional TV mounting service if your wall is brick, concrete, plaster, or tile; if your TV is 65 inches or larger; if you want cable concealment; or if you're uncomfortable working at height or drilling into walls. Professional installers complete the job safely, ensure proper weight distribution, and provide warranty coverage. They also handle unexpected complications like hidden plumbing or electrical lines.
Frequently asked questions
Standard drywall TV mounting costs $80–$200 per TV, including the bracket and installation labor. This is the most affordable option because drywall is easy to work with and doesn't require specialized tools.
Yes, brick and concrete mounting costs $150–$350 per TV—roughly 2–3 times more than drywall. These materials require masonry bits, special anchors, and significantly more labor time.
Surface raceway costs $50–$150 and runs along the wall surface. In-wall conduit costs $150–$250 and hides cables inside the wall but requires cutting and patching drywall.
You can DIY on drywall if you're comfortable drilling and using a stud finder, potentially saving $80–$150. However, mistakes can damage your TV or wall—professional installation is recommended for safety, especially for large or heavy TVs.
A standard drywall mount takes 1–2 hours. Complex jobs with cable concealment, multiple TVs, or difficult wall materials can take 3–4 hours.
Only if you want a new electrical outlet near the TV or need to relocate power. If outlets already exist nearby, the TV installer can usually manage cables without an electrician.
The first TV typically costs $100–$350; each additional TV costs 25–30% less due to setup efficiency and bulk discounts, so mounting 3 TVs might cost $250–$700 total.
Watch for upcharges: heavy TVs (75"+ or 100+ lbs) may add $50–$100; high or vaulted ceilings add 20–30%; discovering plumbing or electrical behind the wall may require rerouting (additional $100–$300).